Digital Solutions BVE02 ESAM Interface Owner’s Manual January 2010
10 BVE02 Interface The control information from the Edit Controller’s ‘Serial (Audio) Mixer’ connector should be fed into the ‘Editor’ connector of
11Edit Controller Setups The setup of the Edit Controller varies according to the type of editor. An example of the setup is shown
12 Sony BVE2000 The setup for the audio mixer control is described in the BVE2000 manual section “5-1-6 Setting the Audio Mixer Opera
13Monitoring The term Monitoring in audio refers to the signal which is intended to be heard in the control room or edit suite. There are several di
14 Edit Suite Monitoring Operation Monitor Edit Source monitor In this mode, the audio from source Machines is monitored after it has
15 Live Monitor Setup with BVE02-PV The monitoring for live Studio Gallery operation employs the same monitor matrix setup described at
16 Internal DIP Switch Setup Machine Assignments The Edit Controller is able to control audio channels on the mixer either as individu
17Connections. BVE02 D-type Connector Configuration. PIN # MIXER 9PIN D-TYPE FEMALE LINK, PORT 2, AND EDITOR 9PIN D-TYPE FEMALE 1 GROUND GROUND
18 BVE02 to Yamaha DM1000 and DM2000 Mixer Cable Specification PIN # MIXER CONNECTOR ON BVE02 9PIN D-TYPE (M) REMOTE CONNECTOR ON DM1000/2000 9-P
19Troubleshooting. If the BVE02 and Yamaha mixer do not perform as expected, there are a number of quick checks which will help identify where the p
2 OPERATIONAL OVERVIEW 4 BVE02-PV 4 BVE02-AFV 4 Basic Operation 4 Preview and Monitor Operations 5 Channel Fader Level Adjustments 6 Mixer ESA
20 Fault: The Recorder in an edit system or a Preview Machine in a studio gallery is not heard in the monitoring. 1. Check that the exp
21 Uploading New Code to the BVE02 The BVE02 holds two versions of the operating code – one in ROM and the other in FLASH memory. The unit is norma
22 In the event that the upload is corrupted, setting the internal DIP Switch 1 to ON instructs the unit to load the code held in ROM next time the
23For Technical Support contact: Aspen Media Ltd 11 Wingbury Courtyard Wingrave Aylesbury HP22 4LW Tel: +44 (0) 1296 681313 Fax: +44 (0) 1296 6813
24 Appendix A - Electromagnetic Compatibility This Interface has been designed and constructed to comply with current EEC Electromagnetic Compati
3CONNECTIONS. 17 BVE02 D-type Connector Configuration. 17 Yamaha DM1000 and DM2000 Mixer Remote Connector Configuration 17 BVE02 to Yamaha 02R96
4 Operational Overview The Digital Solutions BVE02 interface enables a Yamaha DM1000, 02R96 or DM2000 digital recording console to be
5the matching audio Machine number for a set of adjacent channels on the mixer or individual channels if these are spread across the mixer. In the e
6 edit controller and BVE02 are configured correctly to provide the required Preview and Edit monitoring. The last 2, 4 or 8 channels of the
7BVE02-PV When connected directly to a Vision Switcher, the BVE02-PV adds a number of significant additional functions to the standard
8 Set-up Yamaha Mixer Setup Before the mixer can be usefully commanded by the edit controller, the appropriate audio connections to the
9For 4-ch operation set channels 45-48 (DM1000), 53-56 (02R96) or 93-96 (DM2000); or for 8 channel operation channels 41-48 (DM10
Kommentare zu diesen Handbüchern